Silo

Trav, the folders on the F:\ drive are just my backup files on my USB thumb drive. As far as C:\ drive is concerned, both paths look the same to me (I changed the folder name to just Apollyon instead of Apollyon Lite 1.0 or whatever I had named it) C:\Users\Simon\Apollyon\Engine\dlls C:\Users\Simon\Apollyon\Engine\Dlls Am I msising the obvious? I appreciate all your help

The path seems quite straight forward. To be honest the project I have planned for the dll is quite minor, so if it does not come to fruition I wont be too concerned. However, I am curious as to why it won't work though.

Totally agree with you, David, but say for example you used Viper bot or Dominator or some other bot code in c+ or vb etc, you can't edit it or make it just the way you wanted. At least with mIRC you can make it 100% the way you like it.

Plus a script (mIRC script) can be fully customised to your liking.

Hi fellows, and thanks for all your help Trav, I changed the script's folder name to just Apollyon and ditched the spaces and the period. Still no luck * /dll: unable to open file 'C:\Users\Simon\Apollyon\Emgine\Dlls\nhtmln_2.95.dll' (line 89, script7.mrc) And I even fixed your typo, Warrior lol * /dll: unable to open file 'C:\Users\Simon\Apollyon\Engine\Dlls\* /dll: unable to open file 'C:\Users\Simon\Apollyon\Emgine\Dlls\nhtmln_2.95.dll' (line 89, script7.mrc)' (line 89, script7.mrc) Warrior why won't $ff(nhtmln_2.95.dll) do the trick? * /dll: unable to open file 'C:\Users\Simon\Apollyon\Engine\dlls\NHTMLN~1.DLL' (line 89, script7.mrc) Thanks again, guys

Hi Trav, thanks. Nice way to error check. Good tip for the future. Local Directory: C:\Users\Simon\Apollyon Lite v1.0\ nthml: C:\Users\Simon\Apollyon Lite v1.0\Engine\dlls\nHTMLn_2.95.dll

Hi Travis, and thanks for the reply. I should of pointed out earlier that, yes there are spaces in the file path but I tried using $qt( ) in tests with no luck either. It's just bizarre since I've never had problems with the dll before. * /dll: unable to open file 'C:\Users\Simon\Apollyon Lite v1.0\Dll\nhtmln_2.95.dll' (line 89, script7.mrc) Also tried changing Dll to Dlls with no joy.

allo the folder is called dlls. Am still geting the same error code /dll: unable to open file 'C:\Users\Simon\Apollyon' (line 89, script7.mrc) Quite odd indeed.

Hi Warrior and thanks for clearing that up for me. That makes a lot of sense, especially since not more than five minutes ago I noticed that my Music folder was in two different places. So that would be using double the memory to store these, or is it like an image of the folder? Pretty sucky if it's chewing up memory. Back to the problem, I decided to use a snippet of Travis' for experimenting with until I solve the issue of the dll. * /dll: unable to open file 'C:\Users\Simon\Apollyon' (line 89, script7.mrc) Travis' alias with your fix (Have I utilised it properly?) Line "89" in bold font. alias webpage { window @WebPage [b] dll $nofile($mircexe) $+ Dll\nhtmln_2.95.dll,attach,$window(@webpage).hwnd [/b] dll $nofile($mircexe) $+ Dll\nhtmln_2.95.dll,margins,-2 dll $nofile($mircexe) $+ Dll\nhtmln_2.95.dll,navigate,http://www.google.com } Cheers

Ahh okay, thanks Warrior, I'll give that a try. I've been using your $ff alias for ages now and won't use anything else to link to my dlls or images. As far as the nHTMLn dll was concerned I tried several file paths including your $ff alias all to no avail. It just kept telling me that it couldn't open the dll. I'll try out your idea now. Thanks : ) PS My script is in a directory with A no spaces and mirc.ini is in just in the main $mircdir and the dlls are in their own folder. Out of curiousity, what difference to the path of the dll has to do with the location of mirc.ini?

RAW 305:*:{ echo -a You are no longer marked as being away. buzzref $active haltdef } RAW 306:*:{ echo -a You have been marked as being away. buzzref $active haltdef } I don't think err0r's code is /who active so if you go to line 116 the buzzref alias and add the line .who $active

YOU change the order to suit your preference. Experiment and swap them around and then replace err0rs icons with your own Whatever the order is in the init section is what the numbers you assign to each level. *EDIT* Add this to err0r's code: RAW 352:*:{ haltdef $iif($left($7,1) == G,set %away. [ $+ [ $6 ] ] $6,unset %away. [ $+ [ $6 ] ] $6) } and then in his nickalias alias (line 133) add this: if (%away. [ $+ [ $1 ] ] == $1) return 12 and then in the init section ad this to line 76: did -i $dname 1,2 1 seticon normal 0, $+ $iconsnl( $+ [b]NEW ICON HERE[/b] $+ ) By doing this you have added a 12th icon which the %away variable is using to show users status ie Away/Active

Sorry, no. I mustn't of explained myself very well. I have zero knowledge of nicklist.dll. I just use MDX (old skool) to add my icons. Doesn't err0r's download work on most servers with a bit of editing? His coding is far superior to mine *EDIT* I just noticed a flaw with the while loop, well not the loop itself, but the info returned. I don;t have time to go in to it atm (I have a job interview tomorrow morning and it is quite late). Anyway, I'll leave this $iif($left($nick(#,Fovea).pnick,2) == &@,$right($nick(#,Fovea).pnick,-1)) to remind me what I wanted to mention. Since we're chatting in real time - you could try this: alias nickicon { if (*~* iswm $nick($active,$1).pnick) && ($1 isop $active) return 1 elseif (*@* iswm $nick($active,$1).pnick) && ($1 isop $active) return 7 elseif (*&* iswm $nick($active,$1).pnick) && ($1 isop $active) return 10 elseif ($1 isvoice $active) return 3 elseif (*m* !iswm $chan($active).mode) && ($1 !isvoice $active) return 8 elseif (*%* iswm $nick($active,$1).pnick) && ($1 ishop $active) return 7 } the just change the return numbers to the icon settings you want.

No problem, glad it worked. nicklist.dll looks pretty neat, and I love how you still get mIRCs default nicklist, but I still can't make the switch from MDX. If you want the complete MDX version with icons just let me know. And as for the auto refresh You need to make an alias with a timer to fire the getnames alias. You'd then use that with On events, like: alias _refresh .timer(REFRESH) -m 1 500 $getnames On *:JOIN:*:if ($nick == $me) $_refresh On *:PART:#:if ($nick != $me) $_refresh On *:KICK:#:if ($knick != $me) $_refresh And so on. I think you get the idea from there.

Apologies for bumping an old topic, but I thought it would be better to use an old one instead of creating a new thread. Does nHTMLn_2.95.dll work with Win 7? Nothing I've been trying seems to work, and it's not that hard to use the damn thing!