Jump to content

Chats usa


SnowX™

Recommended Posts

I haven't tested these but they are common to most chats.

 

Channel Modes

a � Authenticated clients only (IRCX) 

This mode will only allow authenticated clients to join the channel. 

b � Ban flag 

Usage: +b <nick!userid@domain> 

This mode is used to ban a client from the channel. 

d � Cloneable channel (IRCX) 

This mode will cause your channel to clone to <channel>1, <channel2>, etc when the channel limit is reached.  Clients will automatically join the next available channel. 

e � Except flag / cloned channel 

Usage: +e <nick!userid@domain> 

This mode is used to allow clients to bypass a ban. 

f � No client message formatting (IRCX) 

This mode is used to tell chat client software not to format messages. 

g � Operator guard 

This mode is used to prevent channel hosts from given host status to members. 

h � Hidden channel (IRCX) 

This mode is used to hide the channel from the LIST command and can only be queried if the exact channel name is known.

i � Invite only 

This mode will make it so only clients with an invitation can join the channel.  Invitations can be granted using the INVITE command or adding an INVITE entry to the channel access list. 

j � Restrict access list 

This mode will block channel hosts from the channel access list. 

k � Password protected 

Usage: +k <password> 

This mode is used to password protect a channel.  Clients must supply this password in the JOIN command in order to enter the channel. 

l � Member limit flag 

Usage:

Setting the mode: +l <limit>

Removing the mode: -l 

This mode is used to set the maximum number of clients allowed in the channel at one time. 

m � Moderated channel 

This mode makes it so only members with voice status can speak in the channel. 

n � No external messages 

This mode blocks messages being sent from outside of the channel. 

o � Channel operator flag 

Usage: +o <nickname> 

This mode is used to give channel host status to the specified client.

p � Private channel 

This mode causes the channel to be visible in the LIST command (the topic is not visible) and clients are unable to see who is inside the channel from the outside, 

q/O � Channel owner flag (IRCX) 

Usage: +q <nickname> 

This mode is used to give channel owner status to a member.  This can only be set by the channel owner. 

r � Registered channel 

This mode is the channel registration flag. 

s � Secret channel 

This mode is used to hide the channel from the LIST command can cannot be queried from the outside. 

t � Only operators can change topic 

This mode prevents channel members from being able to change the channel topic using the TOPIC command. 

u � Show knock notifications (IRCX) 

This mode will alert the channel owners and hosts if a client fails to join the channel. 

v � Voiced flag 

Usage: +v <nickname> 

This mode is used to give voice status to a member.  This allows the client to speak in a moderated channel.

w � No whispering flag (IRCX) 

This mode is used to block people from being able to whisper in the channel using the WHISPER command.  Channel members are still able to whisper to the channel owners and hosts. 

x � Auditorium (IRCX) 

This mode restricts the visibility and messaging within a channel.  Members will only see themselves and the hosts/owners in the channel.  See above under Access Options section for more information. 

y � Lock channel modes 

This mode will prevent the hosts from changing the channel modes. 

z � Service channel (IRCX) 

This mode marks a channel as being a service channel. 

A � Channel under the control of local administrator 

This mode will prevent server operators from other linked servers controlling the channel. 

C � Clear channel access on empty 

This mode will automatically clear the channel access and ban list when the last client leaves. 

E � Echo messages back to source (IRCX) 

This mode will echo sent messages back to the sender. 

F � Filter message content 

This mode will filter the message content sent to the channel.

K � Cannot change channel passwords 

This mode will prevent the channel owner from changing the channel passwords. 

L � Show channel in list when empty 

This mode will allow the channel to be visible in the LIST command when there is no body inside. 

M � Server operators only 

This mode will only allow server operators to join the channel. 

P � Permanent channel 

This mode will flag the channel as being permanent.  The channel owner will not be able to unregister the channel. 

T � Transcript flag 

This mode will flag the channel to save the conversation to a transcript file. 

I � Invite flag 

Usage: +I <nick!userid@domain> 

This mode is used to add a client to the channel invite list.

 

User Modes

a � Administrator flag 

This mode flags you as being the Server Administrator. 

c � View local connections 

This mode will alert you to local clients connecting and disconnecting from the server. 

e � Does not wish to send or receive DCC 

This mode makes you unable to send or receive DCC request such as Chat and Send. 

f � Exempt from flood protection 

This mode allows you to bypass the flood protection features on the chat server. 

g � Global operator flag 

This mode flags you as being a Global Operator. 

h � Help operator flag 

This mode flags you as being a Help Operator and is able to view help messages. 

i � Invisible flag 

This mode will prevent the user from showing up in WHO and NAMES queries. 

k � View kills and unauthorized connections 

This mode will alert you when a client has been killed via the KILL command.

n � View nick change messages

This mode will alert you when a client has changed nicknames.

o � IRC operator flag 

This mode will flag you as being an IRC Operator. 

p � Does not wish to send or receive CTCP 

This mode will make you unable to send or receive CTCP messages. 

r � Restricted connection 

This mode will flag your connection as being restricted based on the client rules. 

s � View server messages 

This mode will allow you to view server messages. 

t � View command usage 

This mode will alert you when a client using selected commands such as MOTD, LUSERS, etc. 

w � View wallops messages 

This mode makes you able to receive wallop messages.

x � Service agent 

This mode flags you as being a Service Agent and able to view messages issued by the SERVICES command.  Any messages being sent from the service agent will appear from SERVICES as the source. 

y � View whois and kick attempts 

This mode will alert you if a client attempts to kick you out of a channel unsuccessfully or performs a whois on you. 

z � Gag flag 

Usage: MODE <target nickname> z 

This mode can be used by Server Operators to gag a client without their knowledge.  The client will be unable to send messages whilst gagged.  

A � Administrator anonymous flag 

This mode allows the administrator to appear as a regular client to whois queries. 

C � Prefers to speak in Chinese 

This mode is used to inform others of the language they prefer to speak in. 

E � Prefers to speak in English 

This mode is used to inform others of the language they prefer to speak in. 

F � Prefers to speak in French 

This mode is used to inform others of the language they prefer to speak in. 

G � Prefers to speak in German 

This mode is used to inform others of the language they prefer to speak in.

I � Prefers to speak in Italian 

This mode is used to inform others of the language they prefer to speak in. 

L � Filter incoming messages 

This mode will filter your private messages, and block any offensive messages. 

P � Prefers to speak in Portuguese 

This mode is used to inform others of the language they prefer to speak in. 

R � Readable text 

This mode will remove the text formatting and colors in all incoming messages. 

S � Prefers to speak in Spanish 

This mode is used to inform others of the language they prefer to speak in. 

Link to comment
Share on other sites

Generally, the only modes you would need to know for a CUSA nicklist are q (for the admins' level) and o (for the hosts). For more technical information, IRCX manuals are easy to come by, like this one

 

Personally, I'm still strying to work out how to identify the users already marked as away when you join the channels.

Link to comment
Share on other sites

on me:*:JOIN:#: {
 if ($network == CUSA) {
   set -u10 %who. [ $+ [ $chan ] ] $true 
   who $chan
 }
}
raw 352:*: {
 if (!$hget(away. $+ $2)) hmake away. $+ $2 3
 $iif($7 == G,hadd,hdel) away. $+ $2 $6 Away 
 if (%who. [ $+ [ $2 ] ]) haltdef
}
raw 315:*: unset %who. [ $+ [ $2 ] ] 

 

There you go cleric, all people that are away are added to the hash table for you to work out. Just modify as you like.

Edited by The Gate Keeper
Link to comment
Share on other sites

If yougo to the ircxpro web site you can download the manual

and it tells you most of the info you need to know about the server

Link to comment
Share on other sites

chats usa has never been any part of techgear and the banner was removed cause we have been changing things, but you will notice its in mine and err0rs sig on the forum

 

Also the ircx draft that you are talking about is wrong for ircxpro because its not true ircx

 

so go to http://www.ircxpro.com and get the manual

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...