ChanServ
ChanServ allows you to register and control various aspects of channels.
ChanServ can often prevent malicious users from "taking over" channels by limiting who is allowed
channel operator privileges. Available commands are listed below; to use them, type /msg ChanServ
command. For more information on a specific command, type /msg ChanServ HELP command.
Note that any channel which is not used for <num> days (i.e. which no user
on the channel's access list enters for that period of time) will be automatically dropped.
Syntax: /msg ChanServ REGISTER channel password description
Registers a channel in the ChanServ database. In order to use this command, you must first be a channel operator
on the channel you're trying to register. The password is used with the IDENTIFY command to allow others to
make changes to the channel settings at a later time. The last parameter, which must be included, is a general description of the channel's purpose.
When you register a channel, you are recorded as the "founder" of the channel. The channel founder is allowed to change all of the channel settings for the channel;
ChanServ will also automatically give the founder channel-operator privileges when s/he enters the channel. See the ACCESS command (/msg ChanServ HELP ACCESS) for
information on giving a subset of these privileges to other channel users.
NOTICE: In order to register a channel, you must have first registered your nickname. If you haven't, /msg ChanServ HELP for information on how to do so.
Syntax: /msg ChanServ IDENTIFY channel password
Authenticates you to ChanServ as the founder of the given channel. Many
commands require you to use this command before using them. The password
should be the same one you sent with the REGISTER command.
Syntax: /msg ChanServ LOGOUT channel nickname
This command will log the selected nickname out meaning they would have to
reidentify themselves to regain their access.
If you are the founder of the channel, you can log out anybody, else you can
only log out yourself.
Syntax: /msg ChanServ DROP channel
Unregisters the named channel. Can only be used bychannel founder, who must
use the IDENTIFY command first.
Syntax: /msg ChanServ SET channel option parameters
Allows the channel founder to set various channel options and other
information.
Available options:
FOUNDER Set the founder of a channel
SUCCESSOR Set the successor for a channel
PASSWORD Set the founder password
DESC Set the channel description
URL Associate a URL with the channel
EMAIL Associate an E-mail address with the channel
ENTRYMSG Set a message to be sent to users when they enter the channel
BANTYPE Set how Services make bans on the channel
MLOCK Lock channel modes on or off
KEEPTOPIC Retain topic when channel is not in use
OPNOTICE Send a notice when OP/DEOP commands are used
PEACE Regulate the use of critical commands
PRIVATE Hide channel from LIST command
RESTRICTED Restrict access to the channel
SECURE Activate ChanServ security features
SECUREOPS Stricter control of chanop status
SECUREFOUNDER Stricter control of channel founder status
SIGNKICK Sign kicks that are done with KICK command
TOPICLOCK Topic can only be changed with TOPIC
XOP Toggle the user privilege system
Type /msg ChanServ HELP SET option for more information on a particular
option.
SET FOUNDER
Syntax: /msg ChanServ SET channel FOUNDER nick
Changes the founder of a channel. The new nickname must be a registered one.
SET SUCCESSOR
Syntax: /msg ChanServ SET channel SUCCESSOR nick
Changes the successor of a channel. If the founder's nickname expires or is
dropped while the channel is still registered, the successor will become the
new founder of the channel. However, if the successor already has too many
channels registered (<num>), the channel will be dropped instead, just as if
no successor had been set. The new nickname must be a registered one.
SET PASSWORD
Syntax: /msg ChanServ SET channel PASSWORD
password
Sets the password used to identify as the founder of the channel.
SET DESC
Syntax: /msg ChanServ SET channel DESC
description
Sets the description for the channel, which shows up with the LIST and INFO
commands.
SET URL
Syntax: /msg ChanServ SET channel URL [url]
Associates the given URL with the channel. This URL will be displayed
whenever someone requests information on the channel with the INFO command.
If no parameter is given, deletes any current URL for the channel.
SET EMAIL
Syntax: /msg ChanServ SET channel EMAIL
[address]
Associates the given E-mail address with the channel. This address will be
displayed whenever someone requests information on the channel with the INFO
command. If no parameter is given, deletes any current E-mail address for
the channel.
SET ENTRYMSG
Syntax: /msg ChanServ SET channel ENTRYMSG [message]
Sets the message which will be sent via /notice to users when they enter the
channel. If no parameter is given, causes no message to be sent upon
entering the channel.
SET BANTYPE
Syntax: /msg ChanServ SET channel BANTYPE bantype
Sets the ban type that will be used by services whenever they need to ban
someone from your channel.
bantype is a number between 0 and 3 that means:
0: ban in the form *!user@host
1: ban in the form *!*user@host
2: ban in the form *!*@host
3: ban in the form *!*user@*.domain
SET KEEPTOPIC
Syntax: /msg ChanServ SET channel KEEPTOPIC {ON |
OFF}
Enables or disables the topic retention option for a channel. When topic
retention is set, the topic for the channel will be remembered by ChanServ
even after the last user leaves the channel, and will be restored the next
time the channel is created.
SET TOPICLOCK
Syntax: /msg ChanServ SET channel TOPICLOCK {ON
| OFF}
Enables or disables the topic lock option for a channel. When topic lock is
set, ChanServ will not allow the channel topic to be changed except via the
TOPIC command.
SET MLOCK
Syntax: /msg ChanServ SET channel MLOCK modes
Sets the mode-lock parameter for the channel. ChanServ allows you to define
certain channel modes to be always on, off or free to be either on or off.
The modes parameter is constructed exactly the same way as a /MODE command;
that is, modes followed by a + are locked on, and modes followed by a - are
locked off. Note, however, that unlike the /MODE command, each use of SET
MLOCK will remove all modes previously locked before setting the new!
Warning: If you set a mode-locked key, as in the second example below, you
should also set the RESTRICTED option for the channel (see HELP SET
RESTRICTED), or anyone entering the channel when it is empty will be able to
see the key!
Examples:
SET #channel MLOCK +nt-iklps
Forces modes n and t on, and modes i, k, l, p, and s off. Mode m is left
free to be either on or off.
SET #channel MLOCK +knst-ilmp my-key
Forces modes k, n, s, and t on, and modes i, l, m, and p off. Also forces
the channel key to be "my-key".
SET #channel MLOCK +
Removes the mode lock; all channel modes are free to be either on or off.
SET PEACE
Syntax: /msg ChanServ SET channel PEACE {ON | OFF}
Enables or disables the peace option for a channel. When peace is set, an
user won't be able to kick, ban or remove a channel status of an user that
has a level superior or equal to his via ChanServ commands.
SET PRIVATE
Syntax: /msg ChanServ SET channel PRIVATE {ON | OFF}
Enables or disables the private option for a channel. When private is set, a
/msg ChanServ LIST will not include the channel in any lists.
SET RESTRICTED
Syntax: /msg ChanServ SET channel RESTRICTED
{ON | OFF}
Enables or disables the restricted access option for a channel. When
restricted access is set, users who would normally be disallowed from having
channel operator privileges (users with negative access levels and, if
secure ops is set, users not on the access list) will instead be kicked and
banned from the channel.
SET SECURE
Syntax: /msg ChanServ SET channel SECURE {ON | OFF}
Enables or disables ChanServ's security features for a channel. When SECURE
is set, only users who have registered their nicknames with ChanServ and
IDENTIFY'd with their password will be given access to the channel as
controlled by the access list.
SET SECUREOPS
Syntax: /msg ChanServ SET channel SECUREOPS {ON |
OFF}
Enables or disables the secure ops option for a channel. When secure ops is
set, users who are not on the userlist will not be allowed chanop status.
SET SECUREFOUNDER
Syntax: /msg ChanServ SET channel SECUREFOUNDER {ON |
OFF}
Enables or disables the secure founder option for a channel. When secure
founder is set, only the real founder will be able to drop the channel,
change its password, its founder and its successor, and not those who are
IDENTIFY'd with ChanServ.
SET SIGNKICK
Syntax: /msg ChanServ SET channel SIGNKICK {ON |
LEVEL | OFF}
Enables or disables signed kicks for a channel. When SIGNKICK is set, kicks
issued with ChanServ KICK command will have the nick that used the command
in their reason.
If you use LEVEL, those who have a level that is superior or equal to the
SIGNKICK level on the channel won't have their kicks signed. See /msg
ChanServ HELP LEVELS for more information.
SET XOP
Syntax: /msg ChanServ SET channel XOP {ON | OFF}
Enables or disables the xOP lists system for a channel. When XOP is set, you
have to use the AOP/SOP/VOP commands in order to give channel privileges to
users, else you have to use the ACCESS command.
Technical Note: when you switch from access list to xOP lists system, your
level definitions and user levels will be changed, so you won't find the
same values if you switch back to access system!
You should also check that your users are in the good xOP list after the
switch from access to xOP lists, because the guess is not always perfect...
in fact, it is not recommended to use the xOP lists if you changed level
definitions with the LEVELS command.
Switching from xOP lists system to access list system causes no problem
though.
SET OPNOTICE
Syntax: /msg ChanServ SET channel OPNOTICE {ON
| OFF}
Enables or disables the op-notice option for a channel. When op-notice is
set, ChanServ will send a notice to the channel whenever the OP or DEOP
commands are used for a user in the channel.
Syntax: /msg ChanServ AOP channel ADD nick
AOP channel DEL {nick | entry-num | list}
AOP channel LIST [mask | list]
AOP channel CLEAR
Maintains the AOP (AutoOP) list for a channel. The AOP list gives users the
right to be auto-opped on your channel, to unban or invite themselves if
needed, to have their greet message showed on join, and so on.
The AOP ADD command adds the given nickname to the AOP list.
The AOP DEL command removes the given nick from the AOP list. If a list of
entry numbers is given, those entries are deleted. (See the example for LIST
below.)
The AOP LIST command displays the AOP list. If a wildcard mask is given,
only those entries matching the mask are displayed. If a list of entry
numbers is given, only those entries are shown; for example:
AOP #channel LIST 2-5,7-9
Lists AOP entries numbered 2 through 5 and 7 through 9.
The AOP CLEAR command clears all entries of the AOP list.
The AOP ADD and AOP DEL commands are limited to SOPs or above, while the AOP
CLEAR command can only be used by the channel founder. However, any user on
the AOP list may use the AOP LIST command.
This command may have been disabled for your channel, and in that case you
need to use the access list. See /msg ChanServ HELP ACCESS for information
about the access list, and /msg ChanServ HELP SET XOP to know how to toggle
between the access list and xOP list systems.
Syntax: /msg ChanServ HOP channel ADD nick
HOP channel DEL {nick | entry-num | list}
HOP channel LIST [mask | list]
HOP channel CLEAR
Maintains the HOP (HalfOP) list for a channel. The HOP list gives users the
right to be auto-halfopped on your channel.
The HOP ADD command adds the given nickname to the HOP list.
The HOP DEL command removes the given nick from the HOP list. If a list of
entry numbers is given, those entries are deleted. (See the example for LIST
below.)
The HOP LIST command displays the HOP list. If a wildcard mask is given,
only those entries matching the mask are displayed. If a list of entry
numbers is given, only those entries are shown; for example:
HOP #channel LIST 2-5,7-9
Lists HOP entries numbered 2 through 5 and 7 through 9.
The HOP CLEAR command clears all entries of the HOP list.
The HOP ADD, HOP DEL and HOP LIST commands are limited to AOPs or above,
while the HOP CLEAR command can only be used by the channel founder.
This command may have been disabled for your channel, and in that case you
need to use the access list. See /msg ChanServ HELP ACCESS for information
about the access list, and /msg ChanServ HELP SET XOP to know how to toggle
between the access list and xOP list systems.
Syntax: /msg ChanServ SOP channel ADD nick
SOP channel DEL {nick | entry-num | list}
SOP channel LIST [mask | list]
SOP channel CLEAR
Maintains the SOP (SuperOP) list for a channel. The SOP list gives users all
rights given by the AOP list, and adds those needed to use the AutoKick and
the BadWords lists, to send and read channel memos, and so on.
The SOP ADD command adds the given nickname to the SOP list.
The SOP DEL command removes the given nick from the SOP list. If a list of
entry numbers is given, those entries are deleted. (See the example for LIST
below.)
The SOP LIST command displays the SOP list. If a wildcard mask is given,
only those entries matching the mask are displayed. If a list of entry
numbers is given, only those entries are shown; for example:
SOP #channel LIST 2-5,7-9
Lists AOP entries numbered 2 through 5 and 7 through 9.
The SOP CLEAR command clears all entries of the SOP list.
The SOP ADD, SOP DEL and SOP CLEAR commands are limited to the channel
founder. However, any user on the AOP list may use the SOP LIST command.
This command may have been disabled for your channel, and in that case you
need to use the access list. See /msg ChanServ HELP ACCESS for information
about the access list, and /msg ChanServ HELP SET XOP to know how to toggle
between the access list and xOP list systems.
Syntax: /msg ChanServ VOP channel ADD nick
VOP channel DEL {nick | entry-num | list}
VOP channel LIST [mask | list]
VOP channel CLEAR
Maintains the VOP (VOicePeople) list for a channel. The VOP list allows
users to be auto-voiced and to voice themselves if they aren't.
The VOP ADD command adds the given nickname to the VOP list.
The VOP DEL command removes the given nick from the VOP list. If a list of
entry numbers is given, those entries are deleted. (See the example for LIST
below.)
The VOP LIST command displays the VOP list. If a wildcard mask is given,
only those entries matching the mask are displayed. If a list of entry
numbers is given, only those entries are shown; for example:
VOP #channel LIST 2-5,7-9
Lists VOP entries numbered 2 through 5 and 7 through 9.
The VOP CLEAR command clears all entries of the VOP list.
The VOP ADD, VOP DEL and VOP LIST commands are limited to AOPs or above,
while the VOP CLEAR command can only be used by the channel founder.
This command may have been disabled for your channel, and in that case you
need to use the access list. See /msg ChanServ HELP ACCESS for information
about the access list, and /msg ChanServ HELP SET XOP to know how to toggle
between the access list and xOP list systems.
Syntax: /msg ChanServ ACCESS channel ADD nick level
ACCESS channel DEL {nick | entry-num | list}
ACCESS channel LIST [mask | list]
ACCESS channel CLEAR
Maintains the access list for a channel. The access list specifies which
users are allowed chanop status or access to ChanServ commands on the
channel. Different user levels allow for access to different subsets of
privileges; /msg ChanServ HELP ACCESS LEVELS for more specific information.
Any nick not on the access list has a user level of 0.
The ACCESS ADD command adds the given nickname to the access list with the
given user level; if the nick is already present on the list, its access
level is changed to the level specified in the command. The level specified
must be less than that of the user giving the command, and if the nick is
already on the access list, the current access level of that nick must be
less than the access level of the user giving the command.
The ACCESS DEL command removes the given nick from the access list. If a
list of entry numbers is given, those entries are deleted. (See the example
for LIST below.)
The ACCESS LIST command displays the access list. If a wildcard mask is
given, only those entries matching the mask are displayed. If a list of
entry numbers is given, only those entries are shown; for example:
ACCESS #channel LIST 2-5,7-9
Lists access entries numbered 2 through 5 and 7 through 9.
The ACCESS CLEAR command clears all entries of the access list.
User access levels
By default, the following access levels are defined:
Founder Full access to ChanServ functions; automatic opping upon entering
channel. Note that only one person may have founder status (it cannot be
given using the ACCESS command).
10 Access to AKICK command; automatic opping.
5 Automatic opping.
3 Automatic voicing.
0 No special privileges; can be opped by other ops (unless secure-ops is
set).
<0 May not be opped.
These levels may be changed, or new ones added, using the LEVELS command;
type /msg ChanServ HELP LEVELS for information.
Syntax: /msg ChanServ AKICK channel ADD {nick | mask}
[reason]
AKICK channel STICK mask
AKICK channel UNSTICK mask
AKICK channel DEL {nick | mask | entry-num | list}
AKICK channel LIST [mask | entry-num | list]
AKICK channel VIEW [mask | entry-num | list]
AKICK channel ENFORCE
AKICK channel CLEAR
Maintains the AutoKick list for a channel. If a user on the AutoKick list
attempts to join the channel, ChanServ will ban that user from the channel,
then kick the user.
The AKICK ADD command adds the given nick or usermask to the AutoKick list.
If a reason is given with the command, that reason will be used when the
user is kicked; if not, the default reason is "You have been banned from the
channel". When akicking a registered nick the nickserv account will be added
to the akick list instead of the mask. All users within that nickgroup will
then be akicked.
The AKICK STICK command permanently bans the given mask on the channel. If
someone tries to remove the ban, ChanServ will automatically set it again.
You can't use it for registered nicks.
The AKICK UNSTICK command cancels the effect of the AKICK STICK command, so
you'll be able to unset the ban again on the channel.
The AKICK DEL command removes the given nick or mask from the AutoKick list.
It does not, however, remove any bans placed by an AutoKick; those must be
removed manually.
The AKICK LIST command displays the AutoKick list, or optionally only those
AutoKick entries which match the given mask.
The AKICK VIEW command is a more verbose version of AKICK LIST command.
The AKICK ENFORCE command causes ChanServ to enforce the current AKICK list
by removing those users who match an AKICK mask.
The AKICK CLEAR command clears all entries of the akick list.
Syntax: /msg ChanServ LEVELS channel SET type level
LEVELS channel {DIS | DISABLE} type
LEVELS channel LIST
LEVELS channel RESET
The LEVELS command allows fine control over the meaning of the numeric
access levels used for channels. With this command, you can define the
access level required for most of ChanServ's functions. (The SET FOUNDER and
SET PASSWORD commands, as well as this command, are always restricted to the
channel founder.)
LEVELS SET allows the access level for a function or group of functions to
be changed. LEVELS DISABLE (or DIS for short) disables an automatic feature
or disallows access to a function by anyone other than the channel founder.
LEVELS LIST shows the current levels for each function or group of
functions. LEVELS RESET resets the levels to the default levels of a
newly-created channel (see HELP ACCESS LEVELS).
For a list of the features and functions whose levels can be set, see HELP
LEVELS DESC.
Syntax: /msg ChanServ INFO channel [ALL]
Lists information about the named registered channel, including its founder,
time of registration, last time used, description, and mode lock, if any. If
ALL is specified, the entry message and successor will also be displayed.
By default, the ALL option is limited to those with founder access on the
channel.
Syntax: /msg ChanServ LIST pattern
Lists all registered channels matching the given pattern. (Channels with the
PRIVATE option set are not listed.) Note that a preceding '#' specifies a
range, channel names are to be written without '#'.
Syntax: /msg ChanServ OP [#channel [nick]]
Ops a selected nick on a channel. If nick is not given, it will op you. If
channel and nick are not given, it will op you on all channels you're on,
provided you have the rights to.
By default, limited to AOPs or those with level 5 access and above on the
channel.
Syntax: /msg ChanServ DEOP [#channel [nick]]
Deops a selected nick on a channel. If nick is not given, it will deop you.
If channel and nick are not given, it will deop you on all channels you're
on, provided you have the rights to.
By default, limited to AOPs or those with level 5 access and above on the
channel.
Syntax: /msg ChanServ VOICE [#channel [nick]]
Voices a selected nick on a channel. If nick is not given, it will voice
you. If channel and nick are not given, it will voice you on all channels
you're on, provided you have the rights to.
By default, limited to AOPs or those with level 5 access and above on the
channel, or to VOPs or those with level 3 and above for self voicing.
Syntax: /msg ChanServ DEVOICE [#channel [nick]]
Devoices a selected nick on a channel. If nick is not given, it will devoice
you. If channel and nick are not given, it will devoice you on all channels
you're on, provided you have the rights to.
By default, limited to AOPs or those with level 5 access and above on the
channel, or to VOPs or those with level 3 and above for self devoicing.
Syntax: /msg ChanServ HALFOP [#channel [nick]]
Halfops a selected nick on a channel. If nick is not given, it will halfop
you. If channel and nick are not given, it will halfop you on all channels
you're on, provided you have the rights to.
By default, limited to AOPs and those with level 5 access and above on the
channel, or to HOPs or those with level 4 and above for self halfopping.
Syntax: /msg ChanServ DEHALFOP [#channel [nick]]
Dehalfops a selected nick on a channel. If nick is not given, it will
dehalfop you. If channel and nick are not given, it will dehalfop you on all
channels you're on, provided you have the rights to.
By default, limited to AOPs and those with level 5 access and above on the
channel, or to HOPs or those with level 4 and above for self dehalfopping.
Syntax: /msg ChanServ PROTECT [#channel [nick]]
Protects a selected nick on a channel. If nick is not given, it will protect
you. If channel and nick are not given, it will protect you on all channels
you're on, provided you have the rights to.
By default, limited to the founder, or to SOPs or those with level 10 and
above on the channel for self protecting.
Syntax: /msg ChanServ DEPROTECT [#channel [nick]]
Deprotects a selected nick on a channel. If nick is not given, it will
deprotect you. If channel and nick are not given, it will deprotect you on
all channels you're on, provided you have the rights to.
By default, limited to the founder, or to SOPs or those with level 10 and
above on the channel for self deprotecting.
Syntax: /msg ChanServ OWNER [#channel]
Gives you owner status on channel. If channel is not given, it will give you
owner status on all channels you're on, provided you have the rights to.
Limited to those with founder access on the channel.
Syntax: /msg ChanServ DEOWNER [#channel]
Removes your owner status on channel. If channel is not given, it will
remove your owner status on all channels you're on, provided you have the
rights to.
Limited to those with founder access on the channel.
Syntax: /msg ChanServ INVITE channel
Tells ChanServ to invite you into the given channel.
By default, limited to AOPs or those with level 5 and above on the channel.
Syntax: /msg ChanServ UNBAN channel
Tells ChanServ to remove all bans preventing you from entering the given
channel.
By default, limited to AOPs or those with level 5 and above on the channel.
Syntax: /msg ChanServ KICK [#channel [nick [reason]]]
Kicks a selected nick on a channel. If nick is not given, it will kick you.
If channel and nick are not given, it will kick you on all channels you're
on, provided you have the rights to.
By default, limited to AOPs or those with level 5 access
and above on the channel.
Syntax: /msg ChanServ BAN [#channel [nick [reason]]]
Bans a selected nick on a channel. If nick is not given, it will ban you. If
channel and nick are not given, it will ban you on all channels you're on,
provided you have the rights to.
By default, limited to AOPs or those with level 5 access and above on the
channel.
Syntax: /msg ChanServ TOPIC channel [topic]
Causes ChanServ to set the channel topic to the one specified. If topic is
not given, then an empty topic is set. This command is most useful in
conjunction with SET TOPICLOCK. See /msg ChanServ HELP SET TOPICLOCK for
more information.
By default, limited to those with founder access on the channel.
Syntax: /msg ChanServ CLEAR channel what
Tells ChanServ to clear certain settings on a channel. what can be any of
the following:
MODES Resets all modes on the channel (i.e. clears modes i,k,l,m,n,p,s,t).
BANS Clears all bans on the channel. EXCEPTS Clears all excepts on the
channel.
OPS Removes channel-operator status (mode +o) from all channel operators.
HOPS Removes channel-halfoperator status (mode +h) from all channel
halfoperators, if supported.
VOICES Removes "voice" status (mode +v) from anyone with that mode set.
USERS Removes (kicks) all users from the channel.
By default, limited to those with founder access on the channel.
Syntax: /msg ChanServ GETKEY channel
Returns the key of the given channel. This is a command mainly intended to
be used by bots and/or scripts, so the output is in the following way:
KEY <channel> <key>
key is "NO KEY" if no key is set.
Syntax: /msg ChanServ SENDPASS channel
Send the password of the given channel to the e-mail address set in the
founder's nickname record. This command is really useful to deal with lost
passwords.
May be limited to IRC operators on certain networks.
This command is unavailable when encryption is enabled.
Services admins can also drop any channel without
needing
to identify via password, and may view the access, AKICK,
and level setting lists for any channel.
SERVADMIN LOGOUT
Syntax: /msg ChanServ LOGOUT channel [nickname]
This command will log the selected nickname out meaning they would have to
reidentify themselves to regain their access.
If you are the founder of the channel, you can log out anybody, else you can
only log out yourself.
If you are a Services admin, you can log out anybody of any channel without
having to be the founder of the channel. Also, you can omit the nickname
parameter; this will log out all identified users from the channel.
SERVADMIN DROP
Syntax: /msg ChanServ DROP channel
Unregisters the named channel. Only Services admins can drop a channel for
which they have not identified.
SERVADMIN SET
Services admins can also set the option NOEXPIRE, with
which channels can be prevented from expiring. Additionally, Services admins
can set options for any channel without identifying by password for the
channel.
SERVADMIN SET NOEXPIRE
Syntax: /msg ChanServ SET channel NOEXPIRE {ON | OFF}
Sets whether the given channel will expire. Setting this to ON prevents the
channel from expiring.
SERVADMIN INFO
Services admins can use the ALL parameter with any
channel.
SERVADMIN LIST
Syntax: /msg ChanServ LIST pattern [FORBIDDEN]
[SUSPENDED] [NOEXPIRE]
Lists all registered channels matching the given pattern. Channels with the
PRIVATE option set will only be displayed to Services admins. Channels with
the NOEXPIRE option set will have a ! appended to the channel name for
Services admins.
If the FORBIDDEN, SUSPENDED or NOEXPIRE options are given, only channels
which, respectively, are FORBIDden, SUSPENDed or have the NOEXPIRE flag set
will be displayed. If multiple options are given, more types of channels
will be displayed. These options are limited to Services admins.
SERVADMIN GETPASS
Syntax: /msg ChanServ GETPASS channel
Returns the password for the given channel. Note that whenever this command
is used, a message including the person who issued the command and the
channel it was used on will be logged and sent out as a WALLOPS/GLOBOPS.
SERVADMIN FORBID
Syntax: /msg ChanServ FORBID channel [reason]
Disallows anyone from registering or using the given channel. May be
cancelled by dropping the channel. Reason may be required on certain
networks.
SERVADMIN SUSPEND
Syntax: /msg ChanServ SUSPEND channel [reason]
Disallows anyone from registering or using the given channel. May be
cancelled by using the UNSUSPEND command to preserve all previous channel
data/settings.
Reason may be required on certain networks.
SERVADMIN UNSUSPEND
Syntax: /msg ChanServ UNSUSPEND channel
Releases a suspended channel. All data and settings are preserved from
before the suspension.
SERVADMIN STATUS
Syntax: /msg ChanServ STATUS channel nickname
Returns the current access level of the given nick on the given channel. The
reply is of the form:
STATUS channel nickname access-level
If an error occurs, the reply will be in the form:
STATUS ERROR error-message
